London Speed-lift Lash Lifting Instructions

London Speed-lift Lash Lifting 

Step-by-Step Instructions

Eyelashes

Step 1: Preparation

• Cleanse the lashes thoroughly using London Brow and Lash Shampoo.
• Select the appropriate-sized silicone pad and attach it to the upper eyelid using speed-lift adhesive.

Step 2: Applying Speed-lift Adhesive

• Apply a strip of speed-lift adhesive to the front of the silicone pad.
• Use the speed-lift lash tool to gently secure the eyelashes onto the pad, ensuring precise placement.

Step 3: Applying Speed-lift Perm Gel (Step 1)

• Use a Micro Brush or speed-lift angled brush to apply Step 1 on lashes, leaving a 1-2 mm gap at the root.
• Apply up to 3/4 of the lashes, avoiding the tips, and distribute the perm in a thick layer evenly from the outer to the inner corner of the eye.

Step 4: Speed-lift Timings

• Refer to the following timings based on the client's natural lash type:
  • Thick Coarse Lashes: 10 - 12 minutes
  • Average Healthy Lashes: 8 - 10 minutes
  • Fine or Thin Lashes: 5 - 6 minutes
• Start the timer once the perm application is complete for the first eye.

Step 5: Removing Perm

• After the appropriate timing, use a damp cotton bud to gently remove the step 1 perm.
• Work slowly to ensure thorough removal and re-adhere any loose lashes with lash adhesive.

Step 6: Applying Speed-lift Step 2 Neutralising Lotion

• Apply Step 2 setting lotion to the lashes using a clean brush, ensuring full coverage.
• Leave the neutralising lotion on for 5 minutes.

Step 7: Neutralising

• Remove the Step 2 neutraliser with a damp cotton bud, following the same process as perm removal.

Step 8: Tinting (Optional)

• Tint the client's lashes while they're still on the eyelash pads or after removing them.
• Limit tinting time to 5-6 minutes to avoid over-processing.

Step 9: Removing Tint

• Use warm damp cotton pads to gently remove the tint, moving in an upward motion.

Step 10: Speed-lift Step 3 Nourishing Serum

• Apply Step 3 nourishing serum to the lashes, gently lifting them away from the pad.

Step 11: Drying and Finishing

• Allow the lashes to air dry for 1-2 minutes.
• Brush the lashes with a small amount of Step 3 using a micro brush to separate them.
• Provide clients with aftercare instructions and recommend appropriate post-treatment products for best results.

 

London Speed-lift Features

• Waterproof so clients can get lashes wet within 24 hours of treatment.
• 100% Vegan and Cruelty-free.
• Synthetic Free, Paraben-free, Ammonia-free.

• Skin Sensitivity Test

• Perform a patch test 72 hours before treatment.
• Apply on the client’s inner arm for at least 5 minutes.
• Record the test on the client record card.
• No guarantee of no allergic reaction during treatment despite a negative test result.

Read our full patch testing guidelines here

Caution

• Professional use only.
• Patch test mandatory before treatment.
• Not for those under 16 years or with specific contraindications (e.g., skin irritations, reactions to perming products, refer to your professional training).

Aftercare

• Avoid aggressive cosmetic treatments, and hot environments for 24 hours.
• Avoid lotions, toners, and creams in the treated area.
• Always brush brows and lashes up and into place after getting wet.

 

Storage Conditions

• Store between +5°C to +25°C, away from heat and direct sunlight.

Manufacturer / RP

• London Brow Company Limited, 85 Great Portland Street, London, W1W 7LT, UK
• Contact: +44 8003345373
• www.londonbrowcompany.com

Remember to always follow your training and adjust timings and techniques as needed for each client's specific brow or lash type. Enjoy creating beautiful lashes!