Currency

Your cart

Your cart is empty

Visit some of our best selling ranges

London Brow DUO

Brow Lamination and Lash Lifting One Step Range

Step-by-Step Instructions

Eyebrows

1. Cleansing

2. Preparation

  • Brush the eyebrows with a disposable mascara brush.
  • If using Brow Adhesive: Apply a thin coat of brow Glue. Straighten the hairs and set them in the desired direction and shape.
  • If not using Brow Adhesive: Apply a thin barrier lotion or Vaseline to the top and under the brow.

3. Duo Brow Perm Application (Lifting Creme 1)

  • Apply a thin coat evenly with a microfiber brush, ensuring full hair coverage.
  • Avoid skin contact and remove excess product from the skin with a damp cotton bud or pad.
  • If desired, cover with clean cling film.

Timings :

  • Thin/Fine Brows: 2-3 minutes
  • Medium/Normal Hair: 3-6 minutes
  • Coarse Stubborn Hairs: 6-8 minutes
  • Check brows halfway through for processing.

4. Removal of LB Duo Brow Lift Step 1

  • After processing, gently remove with a damp cotton pad, following hair growth.
  • Ensure all perm is removed before proceeding to step 2.
  • Set hairs at a soft angle towards the tail.

5. Applying LB Duo Neutralising Creme (Step 2)

  • Apply generously over the brow hairs.
  • Remove excess product from the skin.
  • Leave on for 8 minutes.
  • Halfway through, gently set hairs in place.

6. Removal of LB Brow Lift Step 2

  • After processing, carefully remove with a damp cotton pad.
  • Ensure all neutraliser is removed before tinting or shaping.

7. Eyebrow Tinting

  • Dye the eyebrows as per training.
  • Consider client preference for a natural or bold look.
  • Remove excess dye promptly to control tinting.

8. Waxing

  • Wax brows as per training, after lamination and tinting.

9. Nourishing Serum Application (LBStep 3)

  • Apply liberally to the entire eyebrow area.
  • Set brows in final position.
  • Leave on to absorb without washing off.

10. Client Aftercare

  • Show the client the final look and explain aftercare instructions.

 

 

Eyelashes

Step 1: Preparation

Step 2: Applying Speed-lift Adhesive

  • Apply a strip of speed-lift adhesive to the front of the silicone pad.
  • Use the speed-lift lash tool to gently secure the eyelashes onto the pad, ensuring precise placement.

Step 3: Applying LB Duo Perm Gel

  • Use a Micro Brush or speed-lift angled brush to apply Step 1 LB Duo on lashes, leaving a 1-2 mm gap at the root.
  • Apply up to 3/4 of the lashes, avoiding the tips, and distribute the perm in a thick layer evenly from the outer to the inner corner of the eye.

Step 4: LB Duo Timings

  • Refer to the following timings based on the client's natural lash type:
    • Thick Coarse Lashes: 6 - 8 minutes
    • Average Healthy Lashes: 4 - 6 minutes
    • Fine or Thin Lashes: 3 - 4 minutes
  • Start the timer once the perm application is complete for the first eye.

Step 5: Removing Perm

  • After the appropriate timing, use a damp cotton bud to gently remove the LB Duo perm.
  • Work slowly to ensure thorough removal and re-adhere any loose lashes with lash adhesive.

Step 6: Applying LB Duo Step 2 Neutralising Lotion

  • Apply Step 2 LB Duo setting lotion to the lashes using a clean brush, ensuring full coverage.
  • Leave the neutralising lotion on for 8 minutes.

Step 7: Neutralising

  • Remove the Duo neutraliser with a damp cotton bud, following the same process as perm removal.

Step 8: Tinting (Optional)

  • Tint the client's lashes while they're still on the eyelash pads or after removing them.
  • Limit tinting time to 5-6 minutes to avoid over-processing.

Step 9: Removing Tint

  • Use warm damp cotton pads to gently remove the tint, moving in an upward motion.

Step 10: LB Duo Step 3 Nourishing Serum

  • Apply Step 3 nourishing serum to the lashes, gently lifting them away from the pad.

Step 11: Drying and Finishing

  • Allow the lashes to air dry for 1-2 minutes.
  • Brush the lashes with a small amount of Step 3 using a micro brush to separate them.
  • Provide clients with aftercare instructions and recommend appropriate post-treatment products for best results.

     

    London Brow Duo Features

    • Waterproof so clients can get brows or lashes wet within 24 hours of treatment.
    • 100% Vegan and Cruelty-free.
    • Synthetic Free, Paraben-free, Ammonia-free.

    • Skin Sensitivity Test
    • Perform a patch test 72 hours before treatment.
    • Apply on the client’s inner arm for at least 5 minutes.
    • Record the test on the client record card.
    • No guarantee of no allergic reaction during treatment despite a negative test result.

    Read our full patch testing guidelines here

    Caution

    • Professional use only.
    • Patch test mandatory before treatment.
    • Not for those under 16 years or with specific contraindications (e.g., skin irritations, reactions to perming products, refer to your professional training).

    Aftercare

    • Avoid aggressive cosmetic treatments, and hot environments for 24 hours.
    • Avoid lotions, toners, and creams in the treated area.
    • Always brush brows and lashes up and into place after getting wet.

     

    Storage Conditions

    • Store between +5°C to +25°C, away from heat and direct sunlight.

    Manufacturer / RP

    • London Brow Company Limited, 85 Great Portland Street, London, W1W 7LT, UK
    • Contact: +44 8003345373
    • www.londonbrowcompany.com

    Remember to always follow your training and adjust timings and techniques as needed for each client's specific brow or lash type. Enjoy creating beautiful brows and lashes!