London Brow Lamination Lite Instructions

London Brow Lamination Pro Range - Step-by-Step Instructions

1. Cleansing

• Start by removing makeup from the eyebrows using an oil-free pre-wax cleanser or brow cleanser.

2. Preparation

• Brush the eyebrows with a disposable mascara brush.
• If using Brow Adhesive: Apply a thin coat of brow Glue. Straighten the hairs and set them in the desired direction and shape.
• If not using Brow Adhesive: Apply a thin barrier lotion or Vaseline to the top and under the brow.

3. Brow Perm Application (Lite Lifting Creme 1)

• Apply a thin coat evenly with a micro fibre brush, ensuring full hair coverage.
• Avoid skin contact and remove excess product from the skin with a damp cotton bud or pad.
• If desired, cover with clean cling film.

Timing:

• Thin/Fine Brows: 3-6 minutes
• Medium/Normal Hair: 4-8 minutes
• Coarse Stubborn Hairs: 8-12 minutes
• Check brows halfway through for processing.

4. Removal of Brow Lift 1

• After processing, gently remove with a damp cotton pad, following hair growth.
• Ensure all perm is removed before proceeding to step 2.
• Set hairs at a soft angle towards the tail.

5. Applying Neutralising Creme (Step 2)

• Apply generously over the brow hairs.
• Remove excess product from the skin.
• Leave on for 8 minutes.
• Halfway through, gently set hairs in place.

6. Removal of Brow Lift 2

• After processing, carefully remove with a damp cotton pad.
• Ensure all neutraliser is removed before tinting or shaping.

7. Eyebrow Tinting

• Dye the eyebrows as per training.
• Consider client preference for a natural or bold look.
• Remove excess dye promptly to control tinting.

8. Waxing

• Wax brows as per training, after lamination and tinting.

9. Nourishing Serum Application (Step 3)

• Apply liberally to the entire eyebrow area.
• Set brows in final position.
• Leave on to absorb without washing off.

10. Client Aftercare

• Show the client the final look and explain aftercare instructions.

London Brow Lamination Features

• Synthetic Free, Paraben-free, Ammonia-free.
• 100% Vegan and Cruelty-free.

• Skin Sensitivity Test

• Perform a patch test 72 hours before treatment.
• Apply mixed tint on the client’s inner arm for at least 5 minutes.
• Record the test on the client record card.
• No guarantee of no allergic reaction during treatment despite a negative test result.

Read our full patch testing guidelines here

Caution

• Professional use only.
• Patch test mandatory.
• Not for those under 16 years or with specific contraindications (e.g., skin irritations, reactions to perming products, refer to your professional training).

Aftercare

• Avoid aggressive cosmetic treatments, and hot environments for 24 hours.
• Avoid lotions, toners, and creams in the treated area.
• Always brush brows up and into place after getting wet.

 

Storage Conditions

• Store between +5°C to +25°C, away from heat and direct sunlight.

Manufacturer / RP

• London Brow Company Limited, 85 Great Portland Street, London, W1W 7LT, UK
• Contact: +44 8003345373
• www.londonbrowcompany.com

Remember to always follow your training and adjust timings and techniques as needed for each client's specific brow type. Enjoy creating beautiful brows!